Mardom MAX mounting adhesive

Mardom MAX Mounting Fast Active Adhesive

Mardom MAX is a one-component adhesive, free of solvents and isocyanates. It is a completely safe, stable and strong product, intended for home and professional use. It is characterized by excellent resistance to weather conditions and high adhesion, even on slightly damp surfaces. It can be successfully used indoors and outdoors. It is suitable for mounting:

        ·     Mardom Decor decorative wall, ceiling and floor strips and stucco elements

• Concrete, metal (including steel), zinc, PVC, ceramics, glass, epoxy resin, polyester and painted wood surfaces
• Bonding of panels

Mardom MAX is characterized by a very short drying time. It only takes 8 seconds for the glue to bind and stably and permanently attach the stucco to the surface. In order to achieve the best result when installing Mardom Decor strips, we recommend applying a minimum amount of the product to the inner edge of the stucco (adhesive layer thickness approximately 2 mm). Then place the strips on the gluing surface, press and hold for 8 seconds so that the glue can fully develop its initial adhesion. It will also be useful for masking joints and filling small irregularities. After drying, the glue can be easily painted in any color. Due to the possibility of chemical reactions, we recommend testing on a small fragment before painting.

In order to achieve the best results, we recommend appropriate preparation of the surface before gluing. The wall should be degreased, dusted, dry, stable, without peeling paint or crumbling plaster.

Advantages of Mardom MAX:

        ·       Extremely high initial grip

• Up to 270 kg/m²
• Extremely high final strength
• Up to 370 kg/10 cm²
• Possible installation on slightly damp surfaces
• Solvent-free product

If it is necessary to clean the surface of fresh glue, we recommend immediately using a solvent and degreaser. In the case of a cured product, it will be necessary to remove the adhesive mechanically.

Usage limitation:

        ·   Do not use the following materials for fastening: PE, PP, PC, PMMA, PTFE, neoprene, bituminous substrates, e.g.

• Do not use in places with constant contact with water, e.g. swimming pools
• Do not use on natural stone and mirrors

We delivery all our coving products throughout Ireland