MARDOM FIX PRO mounting adhesive

Mardom Decor Fix Pro Adhesive - 1 cartridge for 12 running meters of profiles (on average).

Mardom Fix Pro is an acrylic-based construction adhesive with a paste consistency. It does not run off vertical surfaces during gluing, so it is fully suitable for mounting stucco elements on walls. It can be successfully used on uneven surfaces with porous surfaces. It is white in color and can be painted after drying. For this purpose, we recommend using solvent-free, water-based paint. It does not contain harmful solvents or odor, making it completely safe for home and commercial use. Dedicated to use indoors for mounting elements such as:

        ·  Decorative wall, skirting and lighting profiles and all stucco elements attached to the wall

• Wooden surfaces, chipboards, plastics, stone, wall tiles
• Bonding of panels
• Most decorative materials

Fix Pro is an assembly product intended for use on all typical construction substrates. It is perfect for attaching Mardom Decor stucco to wall surfaces. The drying time of the glue is 24 hours. It should be used with a dedicated glue gun. Apply the appropriate amount of glue on the inner wall of the stucco using even strips, dots or waves. Too little product may have a negative impact on the permanent and stable attachment of stucco to the surface. Press the moulding with the glue applied to the wall and hold it for several seconds. Then wait until it dries completely.

For best results, we recommend carefully preparing the surface before gluing. The wall should be free of grease, dust, dry, stable, and free of peeling paint or crumbling plaster. At least one of the glued elements should have a porous surface.

Advantages of Mardom Fix Pro:

        ·  Extremely high initial adhesion – 125 kg/m³

• Perfect for porous surfaces
• Solvent-free product
• Possibility of painting with water-based paints
• Moisture resistant

If it is necessary to remove adhesive residues from the surface of walls or stucco, you can clean it with a damp cloth or sponge before the product dries. Just water is enough, without the need to use detergents. If the glue dries, it can only be removed mechanically

We delivery all our coving products throughout Ireland