Intumescent Self Adhesive Strip (with brush)

This Self Adhesive Intumescent Strip is designed for retro fitting onto the existing frame so no need for routing out the door or window frame.

Roll size 25mm x 1.8m x 5400mm (Pile Height 5mm)

The Exitex Surface Mounted Intumescent should only be fitted to timber door leaves and framing material that has been successfully tested for a period of 30 minutes in accordance with the criteria of BS 476 Part:22 1987. There door keep shut signage should be fitted to comply with BS 5499-5:2002 in accordance with approved document B Volume 2, appendix B clauses 8 & 9

Length 5.2mm suitable for gaps 3-5mm

Fitting Instructions

1. Clean surfaces with alcohol wipe supplied to ensure they are free from dust and grease.
2. Remove backing tape and position with brush against the door stop as indicated.
3. Apply to both sides over hinges and latch plate. With a sharp knife cut around the latch plate allowing the door to engage. Apply to top of door frame cutting in corners ensuring a tight fit.
4. For best results allow the adhesive to cure overnight.
5. Apply fire door stickers enclosed.

We Deliver throughout Ireland and the UK.